


Pipe Wall Reduction Monitoring System









overview
Measures pipe thickness from ultrasonic reflection time by functioning as an ultrasonic transducer to measure corrosion and wear thinning of pipes in factories
Adheres to piping and can be installed without taking up thickness
Permanent installation and measurement during operation are possible with high-temperature piping
Can be installed in narrow spaces such as under insulation
✓
✓
✓
✓
Features
overview
Enables edge sensing in high-temperature areas, narrow areas, and difficult-to-access areas in factories.
Realize optimization of digital twin construction, anomaly detection prediction, maintenance and production.
-
Measurement by retrofitting a hose band with a sensor to the piping
-
Simultaneous use of 8 ultrasonic sensors*1 and 8ch pulsar module*2
-
*1 Simultaneous transmission/reception: 1 element
-
*2 Supported OS: Windows 10, Connection method: USB connection
Product
Product Name Pipe Wall Reduction Monitoring
SystemModel PU-ST-00
Specifications
Maximum number of installed sensors 8*1
Number of simultaneous transmission/reception 1
Applicable piping 25A~
Heat resistance temperature 100[°C]
*Precautions
1. Please refer to each product for ultrasonic sensor and pulsar receiver specifications.
2. If you have any questions, please contact us.
ultrasonic sensor
overview
Ultrasonic probe/vibration/strain sensor
-
Long-term monitoring of hot pipes
-
Operational inspection of hot parts (thickness/defects)
-
Installation in a narrow space such as under a heat insulator
-
No need to attach/detach, monitoring during operation in high places, etc.
Product
Product Name Ultrasonic Sensor
Specifications
Bandwidth Wideband
Transducer diameter 12mm
Heat resistance temperature ~100°C
Measuring section thickness 1mm
Bending radius 10mm
Ultrasonic sensor/Pulsar receiver
overview
-
Pulser receiver for CAST ultrasonic sensor evaluation
-
8ch device can be connected*1
-
Accompanying software*2 can draw echo waveforms and save data
*1 Simultaneous transmission/reception: 1 element
*2 Supported OS: Windows 10, Connection method: USB connection
Product
Product Name Pulsar Receiver
Specifications
Dimensions 230 (W) x 150 (D) x 75 (H)
Case Aluminum
Number of channels 8
Number of Simultaneous Transmit/Receive Channels 1
Transmission switching method Mode of transmitting and receiving with specified elements and switching every N (max. 2048) transmissions
Waveform output format RF, waveform detection
USB performance Transfer method USB2.0 (type B)
*Precautions
1. This product is a pulsar receiver exclusively for our ultrasonic sensors, and we do not guarantee the operation of sensors from other manufacturers.
2. The operating environment is intended for indoor use, so please refrain from using the product in extreme environments.
3. If you have any questions, please contact us.